Kaiser Aluminum | Rod and Bar – Cold Finished

Rod and Bar – Cold Finished




Plate, Sheet and Coil Availability | Rod and Bar – Cold Finished Availability



Alloy and Temper Availability
2011 T3 T465 T451 T6 T651 T8
2014 T4 T451 T6 T651
2017 T4 T451
2024 T3 T4 T351 T3511 T6 T81 T851 T8511
2219 T31 T3511 T81 T851
4026 T4 T451 T6 T651
6033 T651 T8
6040 T6 T651 T8 T9
6061 T4 T451 T6 T6511
7X49 T6 T76511 T6511 T73 T73511 T74 T74511 T76
7050 T73 T73511 T74 T74511 T76 T76511
7068 T6 T651 T6511 T76 T76511
7075 T6 T651 T6511 T73 T7351 T73511 T76 T76511
  • 1 Additional alloy temper subject to special injury.
Dimensional Ranges
Round Square Rectangle Hex
Cold Finished .125″ – 8.500″ .125″ – 6.300″ .125″ x Various to
6.000″ x 8.000″
.250″ – 3.000″
Extruded .300″ – 8.500″ .375″ – 6.3000″ .125″ x Various to 6.000″ x 8.000″ .250″ – 3.000″
Special Notes: Additional sizes, alloys and tempers are subject to inquiry. Rounds in non-stress-relieved tempers (TX) are available in the complete size range listed below. Rounds in stress-relieved tempers (TX51, TX5111) are available from .300″ to 8.000″. The maximum diameter of 2011 T3 and 2011 T8 is 3.500″. Dimensions are dependent upon the alloy and temper.
Specifications – May vary depending on temper
Alloy ASTM AMS
2011 B211 QQ-A-225/3
2014 B211 B221 QQ-A-225/4, 4121 QQ-a-225/2, 4153
2017 B211 QQ-A-225/5, 4118
2024 B211 B221 QQ-A-225/6, 4120, 4339 QQ-A-200/3, 4152, 4164, 4165
2219 B211 B221 4162, 4163
6061 B211 QQ-A-225/8, 4115, 4116, 4117, 4128 4150, 4160, 4161, 4172, 4173
7X49 4157, 4159
7050 4340, 4341, 4342
7075 B211 B221 QQ-A-225/9, 4122, 4123, 4124 QQ-A-200/11, 4154, 4166, 4167, 4168, 4169


Rod, bar and wire are frequently identified by the color codes shown in the following chart, either on tags or paint on the end of rod and bar. These colors do not apply to ink used for identification markers.
Alloy Color
2011 Brown
2014 Gray
2017 Yellow
2024 Red
2219 Yellow/Blue
6061 Blue
7049 Purple/Blue
7050 Yellow/Orange
7075 Black